Undercooling and microhardness of Pb-free solders on various under bump metallurgies

The undercooling behavior of pure Sn, Sn-0.7Cu, Sn-3.5Ag, and Sn-3.8Ag-0.7Cu solder alloys was observed in terms of various under bump metallurgies (UBMs). Four different UBMs (electroplated Cu, electroplated Ni, electroless Ni(P), and electroless Ni(P)/immersion Au) were used. The amount of the undercooling of Pb-free solder alloys was reduced when reacted with electroplated Cu UBM and Ni-based UBMs. The Ni-based UBMs were more effective than Cu UBM in reducing the undercooling of Pb-free solders. When Ni3Sn4 was formed during the interfacial reactions with Ni-based UBMs, the reduction of undercooling was significant, especially for pure Sn and Sn-3.5Ag. The effects of UBMs on the undercooing of Pb-free solder alloys are discussed by comparing intermetallic compounds formed during interfacial reactions with UBMs. In addition, the microstructural changes as well as the microhardness of four solders with or without UBMs are discussed, which could be related to their undercooling behaviors. © 2008 Materials Research Society.